A&R has performed major demolition projects for industrial manufacturing and refineries, commercial facilities, and more. Our state-of-the-art demolition equipment and modern scrap processing equipment enables us to perform large-scale concrete cutting,
crushing and separating, as well as, steel cutting and equipment dismantling.
We can efficiently recycle over 90% of material generated on the job to help minimize the waste and keep landfill costs as low as possible. We guarantee fast, efficient service, no matter what it takes.
Dust Control Plan
Noise Control Plan
With regard to demolition activities, several methods
of noise control are required.
To see these methods more, hover HERE.No person shall cause, suffer, allow, or permit sound from any industrial/commercial facility that, when measured at any residential property line of any affected person, is in exccess of any of the following:
--From 7am-10pm* continuous airborne sound in excess of 65 dBA, or continuous airborne sound in excess of the octave band sound pressure levels in decibels as cited in section 7:29 - 1.2.a.1., pp 4/5 of 18
--from 10pm-7am* continuous airborne sound in excess of 50 dBa, or continuous airborne sound in excess of the octave band sound pressure levels in decibels as cited in section 7:29 - 1.2.a.1., pp 5/6 of 18
* -- It should be noted that planned work hours will be:
Monday-Friday: 7am-4pm EST; 6am-3pm EDT
Saturdays: only as needed.
For purposes of measuring noise in accordance with applicable provisions of the rules(NJAC 7:29), sound levels shall be determined by a qualified investigator using instruments and procedures prescribed by the Department of Noice Control, NJAC 7:29.
Here's a small clip showing you part of one of our demolitions: